Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1522 / 2354

show ipv6 pim static-rp PIM Commands
page 23-108 OmniSwitch CLI Reference Guide March 2011
show ipv6 pim static-rp
Displays the IPv6 PIM Static RP table, which includes IPv6 multicast group address/prefix length, the
static Rendezvous Point (RP) address, and the current status of the static RP configuration (i.e., enabled or
disabled).
show ipv6 pim static-rp
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
If the group prefixes configured for two or more rows in this table overlap, the row with the greatest prefix
length value is used for the overlapping range.
Examples
-> show ipv6 pim static-rp
Group Address/Pref Length RP Address Mode Override Precedence Status
---------------------------+-------------+-----+--------+----------+--------
ff00::/8 3000::11 asm false none enabled
ff34::/32 3000::11 asm false none enabled
Release History
Release 7.1.1; command was introduced.
output definitions
Group Address/Pref Length The IPv6 multicast group address along with the prefix length.
RP Address The IPv6 address of the RP that is mapped for the groups within the
group prefix. This field is set to zero, if the specified IPv6 PIM mode is
SSM or DM.
Mode The IPv6 PIM mode that is used for the groups in this prefix. The possi-
ble values include ASM, SSM, or DM.
Override Specifies that this static RP configuration can override the dynamically
learned RP information for the specified group(s).
Precedence The precedence value that is used for this static RP configuration.
Status Displays whether the static RP configuration is currently enabled or
disabled. Options include
enabled and disabled .