Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 2099 / 2354

Chassis Management and Monitoring Commands show module status
OmniSwitch CLI Reference Guide March 2011 page 38-31
show module status
Displays the basic status information for either a specified module or all modules installed in a standalone
switch chassis.
show module status [slot]
Syntax Definitions
slot The slot number or CMM letter for a specific module installed in the
chassis. If no slot number is specified, status information for all
modules is displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show module status
Operational Firmware
Slot Status Admin-Status Rev MAC
------+-------------+------------+---------+-----------------
CMM-A UP POWER ON N/A 00:d0:95:a3:e5:09
SLOT-1 UP POWER ON N/A 00:d0:95:a3:e5:0b
output definitions
Slot The chassis slot position of the module. For detailed slot numbering
information, refer to the “Chassis and Power Supplies” chapter of the
Hardware User Guide . Refer to page 38-23 for additional information
on CMM callouts.
Operational Status The operational status of the module. Options include UP or DOWN.
For NI and secondary CMM modules, the operational status can be
DOWN while the power status is on, indicating a possible software
issue.
Admin-Status The current power status of the module. Options include POWER ON
or POWER OFF.
Firmware Rev The firmware version for module’s ASICs.
MAC For the CMM, the base chassis MAC address is displayed. For NI mod-
ules, the MAC address for the corresponding NI is displayed.