Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1659 / 2354

QoS Policy Commands policy map group
OmniSwitch CLI Reference Guide March 2011 page 26-19
policy map group
Configures a map group and its associated mappings for 802.1p, Type of Service (ToS), or Differentiated
Services Code Point (DSCP) values. A map group may be referenced in a policy action with the
map
keyword.
policy map group map_group {value1:value2...}
no policy map group map_group
policy map group no {value1:value2...}
Syntax Definitions
map_group The name of the map group (up to 31 alphanumeric characters).
value1 The 802.1p, ToS, or DSCP value to be mapped to another value. May
be a value or a range of values (for example,
1-2 ).
value2... The 802.1p, ToS, or DSCP value to be used in place of value1 . Addi-
tional mapping pairs may be included.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to remove a mapping pair or to remove the map group entirely.
•
The map group may contain more than one mapping pair.
•
If the snapshot command is entered after the policy map group command is configured, the resulting
ASCII file will include the following additional syntax for the policy map group command:
from {cli | ldap | blt}
This syntax indicates how the map group was created. The cli and ldap options may be changed by a
user modifying the ASCII file; however, changing this setting is not recommended. The blt option
indicates a built-in object, this setting is not configurable.
Examples
-> policy map group tosGroup 1-4:3 5-6:5 7:6
-> policy map group tosGroup no 7:6
-> no policy map group tosGroup
Release History
Release 7.1.1; command was introduced.