Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1243 / 2354

Server Load Balancing Commands show ip slb clusters
OmniSwitch CLI Reference Guide March 2011 page 20-35
show ip slb clusters
Displays the status and basic configuration for all Server Load Balancing (SLB) clusters on a switch. This
command also displays traffic statistics for QoS policy condition clusters.
show ip slb clusters [statistics]
Syntax Definitions
statistics Displays SLB statistics for QoS policy condition clusters.
Defaults
By default, the status and basic configuration for all clusters is displayed; statistics are not shown.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the statistics parameter to display the total number of packets that were passed to clusters because
they met the QoS condition criteria configured for that cluster. The polling interval used to obtain such
statistics is every 15 minutes. See the second example below.
Examples
-> show ip slb clusters
Admin Operational # %
Cluster Name VIP/COND Status Status Srv Avail
----------------+----------------+--------+-------------------+-----+---------
WorldWideWeb 128.241.130.204 Enabled In Service 3 95
Intranet 128.241.130.205 Enabled In Service 2 100
FileTransfer 128.241.130.206 Enabled Out of Service 2 50
Output fields are described here:
output definitions
Cluster Name The name of the SLB cluster.
VIP/COND The virtual IP (VIP) address or the policy condition name for the SLB
cluster.
Admin Status The administrative status of the SLB cluster ( Enabled or Disabled ).
Operational Status The operational status of the SLB cluster; In Service (at least one
physical server is operational in the cluster) or Out of Service .
# Srv The total number of physical servers that belong to the SLB cluster.
% Avail The percentage of time that the physical server has been available for
processing client requests. In other words, the actual ratio of up time
(
In Service plus Retrying ) versus down time ( No Answer plus Link
Down ). Please note that the Disabled and the initial Discovery states
are not counted as down time.