Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1099 / 2354

BGP Commands ip bgp policy route-map lpref-mode
OmniSwitch CLI Reference Guide March 2011 page 19-131
ip bgp policy route-map lpref-mode
Configures the action to be taken when setting local preference attribute for a local matching route.
ip bgp policy route-map name sequence_number lpref-mode {none | inc | dec | rep}
Syntax Definitions
name The route map name.
sequence_number The route map sequence number. The valid range is 1–255.
none Do not set the local preference attribute.
inc Increment the local preference attribute in the matching route by the
value specified in the
ip bgp policy route-map med command. No
action is taken if no local preference attribute is found in the matching
route.
dec Decrement the local preference attribute in the matching route by the
value specified in the
ip bgp policy route-map med command. No
action is taken if no local preference attribute is found in the matching
route.
rep Replace the local preference attribute in the matching route by the value
specified in the
ip bgp policy route-map med command even if no
local preference attribute is found in the matching route.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command is used in conjunction with ip bgp policy route-map lpref . The example below shows
the combined usage.
•
In this example, the local preference value is incremented for a matching route by 555.
Examples
-> ip bgp policy route-map routemap1 1 lpref-mode none
-> ip bgp policy route-map routemap1 1 lpref 555 lpref-mode inc
Release History
Release 7.1.1; command was introduced.
parameter default
none | inc | dec | rep none