Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 2030 / 2354

health threshold Health Monitoring Commands
page 36-2 OmniSwitch CLI Reference Guide March 2011
health threshold
Configures thresholds for input traffic (RX), output/input traffic (TX/RX), memory usage, CPU usage, and
chassis temperature.
Input traffic, output/input traffic, memory usage, and CPU usage thresholds specify the maximum
percentage for each resource that may be consumed before a trap is sent to the user. The temperature
threshold specifies the maximum operating temperature, in Celsius, allowed within the chassis before a
trap is sent.
health threshold {rx percent | txrx percent | memory percent | cpu percent }
Syntax Definitions
rx Specifies the maximum input (RX) traffic threshold.
txrx Specifies the maximum output/input (TX/RX) traffic threshold.
memory Specifies the maximum RAM memory usage threshold.
cpu Specifies the maximum CPU usage threshold.
percent The new threshold value, in percent, for the corresponding resource—
rx , txrx , memory , cpu —(0–100).
degrees The new threshold value, in Celsius, for the chassis temperature
threshold (0–100).
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
When a resource falls back below the configured threshold, an additional trap is sent to the user. This
indicates that the resource is no longer operating beyond its configured threshold limit.
•
Changing a threshold value sets the value for all levels of the switch (the switch, module, and port).
You cannot set different threshold values for each level.
•
For detailed information on each threshold type, refer to page 36-5 , or refer to the chapter titled
“Diagnosing Switch Problems” in your Network Configuration Guide.
•
To view the current health threshold values, use the show health configuration command.
parameter default
percentage 80
degrees 50