Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 318 / 2354

show linkagg port Link Aggregation Commands
page 6-60 OmniSwitch CLI Reference Guide March 2011
A port that belongs to a static link aggregate is specified:
-> show linkagg agg 1
Static Aggregate
SNMP Id : 40000001,
Aggregate Number : 1,
SNMP Descriptor : Omnichannel Aggregate Number 1 ref 40000001 size 4,
Name : ,
Admin State : ENABLED,
Operational State : DOWN,
Aggregate Size : 4,
Number of Selected Ports : 0,
Number of Reserved Ports : 0,
Number of Attached Ports : 0,
Primary Port : NONE
A port that belongs to a dynamic aggregate is specified:
-> show linkagg port 2/1
Dynamic Aggregable Port
SNMP Id : 2001,
Slot/Port : 2/1,
Administrative State : ENABLED,
Operational State : DOWN,
Port State : CONFIGURED,
Link State : DOWN,
Selected Agg Number : NONE,
Primary port : UNKNOWN,
LACP
Actor System Priority : 10,
Actor System Id : [00:d0:95:6a:78:3a],
Actor Admin Key : 8,
Actor Oper Key : 8,
Partner Admin System Priority : 20,
Partner Oper System Priority : 20,
Partner Admin System Id : [00:00:00:00:00:00],
Partner Oper System Id : [00:00:00:00:00:00],
Partner Admin Key : 8,
Partner Oper Key : 0,
Attached Agg Id : 0,
Actor Port : 7,
Actor Port Priority : 15,
Link State The current operational state of the link from this port to its remote
partner, which can be
UP or DOWN .
Selected Agg Number The number associated with the static aggregate group to which the
port is attached.
Port position in the aggregate The rank of this port within the static aggregate group.
Primary Port The port number of the first port to join this static aggregate group. If
the first port to join the aggregate is no longer part of the aggregate
group, the switch automatically assigns another port in the aggregate
group to be the primary port.
output definitions (continued)