Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 242 / 2354

show spantree msti ports Distributed Spanning Tree Commands
page 5-100 OmniSwitch CLI Reference Guide March 2011
Release History
Release 7.1.1; command introduced.
Related Commands
Aut Edg The edge port automatic status: yes indicates that the port is an auto-
matic edge port; no indicates that the port is not an automatic edge port.
Configured through the spantree cist auto-edge or spantree vlan
auto-edge command.
Rstr Tcn The restricted TCN capability: yes indicates that the port supports the
restricted TCN capability; no indicates that the port does not support
the restricted TCN capability. Configured through the spantree cist
restricted-tcn or spantree vlan restricted-tcn command.
Rstr Role The restricted role port status: yes indicates that the port is a restricted
role port; no indicates that the port is not a restricted role port. Config-
ured through the spantree cist restricted-role or spantree vlan
restricted-role command.
show spantree ports Displays Spanning Tree port information for the flat mode CIST
instance or a per-VLAN mode VLAN instance.
show spantree cist ports Displays Spanning Tree port information for a CIST instance when
the switch is operating in the per-VLAN or flat Spanning Tree
mode.
show spantree vlan ports Displays Spanning Tree port information for a VLAN when the
switch is operating in the per-VLAN or flat Spanning Tree mode.
output definitions (continued)