Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1524 / 2354

show ipv6 pim group-map PIM Commands
page 23-110 OmniSwitch CLI Reference Guide March 2011
show ipv6 pim group-map
Displays the IPv6 PIM group mapping table.
show ipv6 pim group-map [bsr | static-rp | ssm | dense]
Syntax Definitions
N/A
Defaults
If the keywords bsr , static-rp , ssm , or dense are included in the command line, then only the entries that
were created by the specified origin are displayed.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
If static RP configuration is being used, this information is obtained from those static RP addresses that
are defined through the
ipv6 pim static-rp command. As long as the RP addresses defined in the static
RP set are reachable, they will be added to the group mapping table.
•
If the IPv6 multicast groups are mapped to the mode DM or SSM, then the entries created by local
SSM address range configuration using the
ipv6 pim ssm group command and local Dense Mode
address range configuration using the ipv6 pim dense group command are displayed.
•
If the bootstrap mechanism is being used, this information is obtained from received Candidate-RP
advertisements (when the local router is the BSR; when the local router is not the BSR, this informa-
tion is obtained from received bootstrap messages).
Examples
-> show ipv6 pim group-map
Origin Group Address/Pref Length RP Address Mode Precedence
---------+---------------------------+-------------+-----+-----------
BSR ff00::/8 3000::11 asm 192
BSR ff00::/8 4000::7 asm 192
SSM ff33::/32 ssm
-> show ipv6 pim group-map bsr
Origin Group Address/Pref Length RP Address Mode Precedence
---------+---------------------------+-------------+-----+-----------
BSR ff00::/8 3000::11 asm 192
BSR ff00::/8 4000::7 asm 192
-> show ipv6 pim group-map ssm
Origin Group Address/Pref Length RP Address Mode Precedence
---------+---------------------------+-------------+-----+-----------