Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 2334 / 2354

OmniSwitch CLI Reference Guide March 2011 page 6 IPsec commands
no ipv6 interface if_name
ipv6 interface
if_name tunnel {[source ipv4_source] [destination ipv4_destination]}
ipv6 address ipv6_address /prefix_length [anycast]
{
if_name | loopback
}
no ipv6 address ipv6_address [anycast]
{
if_name
|
loopback
}
ipv6 address ipv6_prefix eui-64
{
if_name | loopback
}
no ipv6 address ipv6_prefix eui-64
{
if_name | loopback
}
ipv6 address global-id {generate | globalID}
ipv6 address local-unicast [global-id globalID] [subnet-id subnetID] {interface-id interfaceID
| eui-64} [prefix-length prefixLength] {if-name | loopback}
[no] ipv6 address local-unicast [global-id globalID] [subnet-id subnetID] {interface-id
interfaceID | eui-64} [prefix-length prefixLength] {if-name | loopback}
ipv6 dad-check ipv6_address if_name
ipv6 hop-limit value
no ipv6 hop-limit
ipv6 pmtu-lifetime
time
ipv6 neighbor stale-lifetime stale-lifetime
ipv6 neighbor ipv6_address hardware_address
{
if_name
}
{port slot/port|linkagg num}
no ipv6 neighbor ipv6_address
{
if_name
}
ipv6 prefix ipv6_address /prefix_length if_name
[valid-lifetime time]
[preferred-lifetime time]
[on-link-flag {true | false}
[autonomous-flag {true | false}] if_name
no ipv6 prefix ipv6_address /prefix_length if_name
ipv6 static-route ipv6_prefix/prefix_length gateway ipv6_address [ if_name ] [metric metric ]
no ipv6 static-route ipv6_prefix/prefix_length gateway ipv6_address [ if_name ]
ipv6 route-pref {static | ospf | rip | ebgp | ibgp} value
ping6 { ipv6_address | hostname } [if_name] [count count ] [size data_size ] [interval seconds ]
traceroute6 {ipv6_address | hostname} [if_name] [max-hop hop_count ] [dest-port
port_number] [probe-count probe] [size size] [host-names {yes|no}]
show ipv6 icmp statistics [if_name]
show ipv6 interface [if_name | loopback]
show ipv6 pmtu table
show ipv6 neighbors [ipv6_prefix/prefix_length | if_name | hw hardware_address | static]
clear ipv6 neighbors
show ipv6 prefixes
show ipv6 routes [ipv6_prefix/prefix_length | static]
show ipv6 route-pref
show ipv6 router database [protocol
type | gateway ipv6_address | dest ipv6_prefix/
prefix_length ]
show ipv6 tcp connections
show ipv6 tcp listeners
show ipv6 traffic [if_name]
show ipv6 tunnel configured
show ipv6 tunnel 6to4
show ipv6 udp ports
show ipv6 information
ipv6 redist {local | static | rip | ospf | isis | bgp} into {rip | ospf | isis | bgp} route-map
route-
map-name
[admin-state {enable | disable}]
ipv6 access-list access-list-name
no ipv6 access-list access-list-name
ipv6 access-list
access-list-name
address
address/prefixLen
[action {permit | deny}]
[redist-control {all-subnets | no-subnets | aggregate}]
no ipv6 access-list access-list-name
address
address/ prefixLen
show ipv6 redist [rip | ospf | bgp]
show ip access-list [
access-list-name ]
ipv6 load rip
ipv6 rip admin-state {enable | disable}
ipv6 rip invalid-timer seconds
ipv6 rip garbage-timer seconds
ipv6 rip holddown-timer seconds
ipv6 rip jitter value
ipv6 rip route-tag value
ipv6 rip update-interval seconds
ipv6 rip triggered-sends {all | updated-only | none}
ipv6 rip interface if_name
[no] ipv6 rip interface if_name
ipv6 rip interface if_name metric value
ipv6 rip interface if_name recv-status {enable | disable}
ipv6 rip interface if_name send-status {enable | disable}
ipv6 rip interface if_name horizon {none | split-only | poison}
show ipv6 rip
show ipv6 rip interface [if_name]
show ipv6 rip peer [ipv6_addresss]
show ipv6 rip routes [dest <ipv6_prefix/prefix_length>] | [gateway <ipv6_addr>] | [detail
<ipv6 prefix/prefix_length>]
IPsec commands
ipsec key
name
{sa-authentication | sa-encryption} [encrypted]
key
no ipsec key
name
{sa-authentication | sa-encryption}
ipsec security-key [
old_key
]
new_key
ipsec policy
name
[priority
priority
] [source {
ipv6_address
[
/prefix_length
]} [port
port
]] [destination {
ipv6_address
[
/prefix_length
]} [port
port
]] [protocol {any |
icmp6 [type
type
]| tcp | udp | ospf | vrrp | number
protocol
}] [in | out] [discard
| ipsec | none] [description
description
] [admin-state {enable | disable}]
no ipsec policy
name