Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1401 / 2354

DVMRP Commands show ip dvmrp
OmniSwitch CLI Reference Guide March 2011 page 22-21
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaDvmrpConfigMIBGroup
alaDvmrpAdminStatus
alaDvmrpRouteReportInterval
alaDvmrpFlashUpdateInterval
alaDvmrpNeighborTimeout
alaDvmrpRouteExpirationTimeout
alaDvmrpRouteHoldDown
alaDvmrpNeighborProbeInterval
alaDvmrpPruneLifetime
alaDvmrpPruneRetransmission
alaDvmrpGraftRetransmission
alaDvmrpInitNbrAsSubord
dvmrpGeneralGroup
dvmrpNumRoutes
dvmrpReachableRoutes
Number of Routes The number of entries in the routing table. This number can be used to
monitor the routing table size and detect illegal advertisements of uni-
cast routes.
Number of Reachable Routes The total number of reachable routes. The number of entries in the rout-
ing table with non-infinite metrics. This number can be used to detect
network partitions by observing the ratio of reachable routes to total
routes. Routes with unreachable metrics, routes in a holddown state,
and routes that have aged out are not considered reachable.
ip dvmrp admin-state Globally enables or disables DVMRP protocol on the switch.
ip dvmrp flash-interval Configures the minimum flash update interval value.
ip dvmrp graft-timeout Configures the graft message retransmission value.
ip dvmrp neighbor-timeout Configures the neighbor timeout.
ip dvmrp prune-lifetime Indicates the length of time a prune will be in effect.
ip dvmrp prune-timeout Configures the prune packet retransmission value.
ip dvmrp report-interval Configures the route report interval.
ip dvmrp route-holddown Configures the time during which DVMRP routes are kept in a hold
down state.
ip dvmrp route-timeout Configures the route expiration timeout value.
ip dvmrp subord-default Configures the neighbor probe interval time.
output definitions (continued)