Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1453 / 2354

PIM Commands show ip pim sparse
OmniSwitch CLI Reference Guide March 2011 page 23-39
Related Commands
MIB Objects
alaPimsmGlobalConfig
alaPimsmAdminStatus
alaPimKeepalivePeriod
alaPimsmMaxRPS
alaPimsmProbeTime
alaPimsmOldRegisterMessageSupport
alaPimRegisterSuppressionTime
alaPimsmRPThreshold
alaPimsmAdminSPTConfig
ip pim sparse admin-state Globally enables or disables PIM-SM protocol on the switch.
ip pim interface Enables or disables the PIM protocol on a specific interface.
ip pim keepalive-period Configures the period during which the (S,G) Join state will be
maintained in the absence of (S,G) Join messages or explicit (S,G)
local membership.
ip pim max-rps Configures the maximum number of C-RP routers allowed in the
PIM-SM domain.
ip pim probe-time Configures the amount of time before the Register Suppression
timer expires, at which point the Designated Router (DR) sends a
Null Register message to the Rendezvous Point (RP). This allows
the RP to refresh the Register-Stop. If the Register Suppression
timer expires, the DR will resume encapsulating packets from the
source to the RP.
ip pim register checksum Configures the application of the checksum function on sent and
received register messages in the domain.
ip pim register-suppress-
timeout Specifies the period during which a Designated Router (DR) stops
sending Register-encapsulated packets to the Rendezvous Point
(RP) after receiving a Register-Stop message.
ip pim rp-threshold Specifies the data rate, in bits per second (bps), at which the Ren-
dezvous Point (RP) will attempt to switch to native forwarding by
issuing a source-specific (S, G) Join message toward the source.
ip pim spt admin-state Enables or disables last hop Designated Router (DR) switching to
the Shortest Path Tree (SPT). If enabled, last hop DR switching to
the SPT begins once the first data packet is received.