Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 889 / 2354

OSPF Commands show ip ospf border-routers
OmniSwitch CLI Reference Guide March 2011 page 17-55
show ip ospf border-routers
Displays information regarding all or specified border routers.
show ip ospf border-routers [area_id] [router_id] [tos] [gateway]
Syntax Definitions
area_id A unique 32-bit value in IP address format.
router_id A unique 32-bit value, such as an IP address, that identifies a neighbor-
ing router in the Autonomous System.
tos The Type of Service. The valid range is 0–15. Only ToS value 0 is
supported at this time.
gateway The 32-bit IP address of the gateway for the border router being
displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command is used to display a list of border routers known by this OSPF router.
•
By using the optional parameters, you can display the border routers using the specified parameter. For
example, to find a router using a router ID of 1.1.1.1, enter the command using the router ID of 1.1.1.1
as a search criteria.
•
See the related commands sections below to modify the list.
Examples
-> show ip ospf border-routers 10.0.0.0
Router Id Area Id Gateway TOS Metric
-----------------+------------------+--------------------+------+--------
10.0.0.0 1.0.0.1 143.209.92.71 1 1
output definitions
Router ID The unique identification for the router.
Area ID A unique 32-bit value, such as an IP address, that identifies a neighbor-
ing router in the Autonomous System.
Gateway The next hop interface on which the border router has been learned.
ToS The Type of Service. Only ToS value 0 is supported at this time.
Metric The cost to the border router.