Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 908 / 2354

show ip ospf area OSPF Commands
page 17-74 OmniSwitch CLI Reference Guide March 2011
Release History
Release 7.1.1; command was introduced.
Related Commands
output definitions
Area Identifier The unique 32-bit value, such as IP address, that identifies the OSPF
area in the AS.
Admin Status Whether the area is enabled or disabled.
Operational Status Whether the area is active.
Area Type The area type. This field will be normal , stub , or NSSA .
Area Summary Whether Area Summary is enabled or disabled.
Time since last SPF Run The last time the Shortest Path First calculation was performed.
# of Area Border Routers
known The number of Area Border Routers in the area.
# of AS Border Routers known The number of Autonomous System Border Routers in the area.
# of LSAs The total number of Link State Advertisements for the Area.
# of SPF Calculations The number of times the area has calculated the Shortest Path.
# of Incremental SPF Calcula-
tions The number of incremental Shortest Path First calculations that have
been performed in the area.
# of Neighbors in Init State The number of OSPF neighbors that are in initialization.
# of Neighbors in 2-Way State The number of OSPF 2-way state neighbors in this area.
# of Neighbors in Exchange
State The number of OSPF neighbors that are currently establishing their sta-
tus.
# of Neighbors in Full State The number of OSPF neighbors.
# of Interfaces attached The number of OSPF interfaces.
Attached Interfaces The names of the OSPF interfaces attached to this area.
ip ospf area Creates or deletes an OSPF area, assigning default metric, cost, and
type.
ip ospf area range Creates a route summarization instance whereby a range of
addresses will be advertised as a single route.
show ip ospf interface Displays OSPF interface information.