Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 2337 / 2354

OmniSwitch CLI Reference Guide March 2011 page 9 OSPFv3 Commands
ip ospf interface { interface_name } type {point-to-point | point-to-multipoint | broadcast | non-
broadcast}
ip ospf interface { interface_name } cost cost
ip ospf interface { interface_name } poll-interval seconds
ip ospf interface { interface_name } priority priority
ip ospf interface { interface_name } retrans-interval seconds
ip ospf interface { interface_name } transit-delay seconds
ip ospf restart-support {planned-unplanned | planned-only}
no ip ospf restart-support
ip ospf restart-interval [
seconds ]
ip ospf restart-helper [admin-state {enable | disable}]
ip ospf restart-helper strict-lsa-checking admin-state {enable | disable}
ip ospf restart initiate
show ip ospf
show ip ospf border-routers [
area_id ] [ router_id ] [ tos ] [ gateway ]
show ip ospf ext-lsdb [linkstate-id ls_id ] [router-id router_id ]
show ip ospf host [ ip_address ]
show ip ospf lsdb [ area_id ] [rtr | net | netsum | asbrsum] [linkstate-id ls_id ] [router-id
router_id ]
show ip ospf neighbor [ ip_address ]
show ip ospf routes [ ip_addr mask tos gateway ]
show ip ospf virtual-link [ router_id ]
show ip ospf virtual-neighbor area_id router_id
show ip ospf area [ area_id ]
show ip ospf area area_id range [{summary | nssa} ip_address ip_mask ]
show ip ospf area area_id stub
show ip ospf interface [ interface_name ]
show ip ospf restart
OSPFv3 Commands
ipv6 ospf admin-state {enable | disable}
ipv6 load ospf
ipv6 ospf host
ipv6_address [ area area_id
]
[metric metric ]
no ipv6 ospf host ipv6_address area area_id
ipv6 ospf mtu-checking
no ipv6 ospf mtu-checking
ipv6 ospf route-tag
tag
ipv6 ospf spf-timer [delay delay_seconds ] [hold hold_seconds ]
ipv6 ospf virtual-link area area_id
router
router_id
[dead-interval seconds ] [hello-interval seconds ] [retrans-interval seconds ] [transit-delay
seconds ]
no ipv6 ospf virtual-link area area_id router router_id
ipv6 ospf area area_id
[t
ype {normal | stub [default-metric metric
]}]
no ipv6 ospf area area_id
ipv6 ospf interface interface_name
no ipv6 ospf interface interface_name
ipv6 ospf interface interface_name admin-state {enable | disable}
no ipv6 ospf interface interface_name
ipv6 ospf interface interface_name area area_id
ipv6 ospf interface interface_name dead-interval seconds
ipv6 ospf interface interface_name hello-interval seconds
ipv6 ospf interface interface_name cost cost
ip ospf interface interface_name priority priority
ipv6 ospf interface interface_name retrans-interval interval
ipv6 ospf interface interface_name transit-delay delay
show ipv6 ospf
show ipv6 ospf border-routers [area
area_id ] [router router_id ]
show ipv6 ospf host [ ipv6_address ]
show ipv6 ospf lsdb [area area_id ] [rtr | net | netsum | asbrsum] [linkstate-id ls_id ] [router-id
router_id ]
show ipv6 ospf neighbor [router ipv4_address ][interface interface_name ]
show ipv6 ospf routes [prefix ipv6_address_prefix][gateway gateway]
show ipv6 ospf virtual-link [
router_id ]
show ipv6 ospf area [ area_id ]
show ipv6 ospf interface [ interface_name ]
BGP Commands
ip load bgp
ip bgp admin-state {enable | disable}
ip bgp autonomous-system
value
ip bgp bestpath as-path ignore
no ip bgp bestpath as-path ignore
ip bgp cluster-id
ip_address
ip bgp default local-preference value
ip bgp fast-external-failover
no ip bgp fast-external-failover
ip bgp always-compare-med
no ip bgp always-compare-med
ip bgp bestpath med missing-as-worst
no ip bgp bestpath med missing-as-worst
ip bgp client-to-client reflection
no ip bgp client-to-client reflection
ip bgp as-origin-interval
seconds
no ip bgp as-origin-interval
ip bgp synchronization
no ip bgp synchronization