Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 2167 / 2354

Session Management Commands !
OmniSwitch CLI Reference Guide March 2011 page 41-15
!
Recalls commands listed in the history buffer and displays them at the CLI prompt.
!{! | n}
Syntax Definitions
! Recalls the last command listed in the history buffer and displays that
command at the CLI prompt.
n Identifies a single command in the history buffer by number and
displays that command at the CLI prompt.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
You can use the history command to list all commands in the history buffer, then use the !n syntax to
issue a single command from the list.
•
When you use !n or !! to recall a command in the history buffer list, you must press the Enter key to
execute the command.
Examples
-> history
1* show ip interface
2 show vlan
3 show arp
4 clear arp
->!2
show vlan
vlan type admin oper ip mtu name
-----+------+-----+-----+-----+-----+------------
1 std Ena Ena Dis 1500 VLAN 1
10 std Ena Ena Ena 1500 VLAN 10
12 std Ena Ena Ena 1500 VLAN 12
14 std Ena Ena Ena 1500 VLAN 14
30 vip Ena Ena Ena 1500 VIP VLAN 30
40 vip Ena Ena Ena 1500 VIP VLAN 40
4094 mcm Ena Ena Dis 9198 MCM IPC
Release History
Release 7.1.1; command was introduced.