Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 2185 / 2354

Session Management Commands show command-log
OmniSwitch CLI Reference Guide March 2011 page 41-33
show command-log
Displays the contents of the command.log file. This file contains a record of all CLI commands executed
on the switch since the command logging function was enabled. For more information on enabling and
disabling command logging, refer to
page 41-17 .
show command-log
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The most recent commands are listed first.
•
The command history is archived to the command.log file. If this file is removed, the command
history will no longer be available. In addition, the command.log file has a 66,402 byte capacity. This
capacity allows up to 100 commands; if the maximum capacity is reached, only the 100 most recent
commands display.
Examples
-> show command-log
Command : ip interface Marketing address 17.11.5.2 vlan 255
UserName : admin
Date : FRI JAN 09 00:20:01
Ip Addr : 128.251.19.240
Result : SUCCESS
Command : ip interface "Distribution" 11.255.14.102 vlan 500 local-proxy-arp
UserName : admin
Date : FRI JAN 09 00:19:44
Ip Addr : 128.251.19.240
Result : ERROR: Ip Address must not belong to IP VLAN 44 subnet
Command : command-log enable
UserName : admin
Date : FRI JAN 09 00:18:49
Ip Addr : 128.251.19.240
Result : SUCCESS