Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 348 / 2354

show multi-chassis loop-detection Multi-Chassis Commands
page 7-24 OmniSwitch CLI Reference Guide March 2011
show multi-chassis loop-detection
Displays the configured and operational parameters related to the multi-chasiss loop-detection feature on
the switch.
show multi-chassis loop-detection
Syntax Definitions
NA
Defaults
NA
Platforms Supported
OmniSwitch 10K
Usage Guidelines
NA
Examples
-> show multi-chassis loop-detection
Status : Enabled,
Transmit Interval : 1s,
Total Transmit Count : 1256,
Total Loop Detect Count : 10,
Port Down List : 2/4 1/3 5/6
Output fields are defined here:
Release History
Release 7.1.1; command introduced.
output definitions
Status Administrative status of the loop-detection feature, which can be
Enabled or Disabled
Transmit Interval
Transmit interval, in seconds, which determines the time interval
between the transmission of sucessive loop-detection packets on each
VLAN active on the switch within the range [1 - 10].
Total Transmit Count
Total number of control packets transmitted on all VLANs configured
on the switch.
Total Loop Count
Total number of control packets that were transmited and received, i.e.
looped back to the originator on all VLANs.
Port Down List List of ports that were brought down because a loop was detected.