Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1165 / 2354

BGP Commands show ipv6 bgp path
OmniSwitch CLI Reference Guide March 2011 page 19-197
-> show ipv6 bgp path ipv6-addr 2020:100:200:1::/64
BGP Path parameters
Path address = 2020:100:200:1::
Path Length = 64
Path protocol = ibgp
Path neighbor = peer(2001:100:3:4::1)
Path nextHop = 2001:100:3:4::1,
Path origin = igp,
Path local preference = 100,
Path state = active,
Path weight = 0,
Path preference degree = 100,
Path autonomous systems = [nAs=0] : <none>,
Path MED = <none>,
Path atomic = no,
Path AS aggregator = <none>,
Path IPaddr aggregator = <none>,
Path community = <none>,
Path Originator Id = <none>,
Path Cluster List = <none>,
Path unknown attribute = <none>
Nbr Address The IP or IPv6 address of the BGP peer that advertises this path.
(0) The origin attribute of this route path. A question mark ( ? ) indicates
incomplete, and i indicates IGP, and an e indicates EGP.
degPref The local preference value assigned to this route path.
output definitions
Path address The IPv6 address for route path.
Path Length The prefix length of the IPv6 path.
Path protocol The protocol from which this route path was learned. Possible values
for this field are as follows:
local , static , directhost , rip , ospf , isis ,
ibgp , ebgp , and other .
Path neighbor The IPv6 address of the BGP peer.
Path nextHop The next hop along the route path.
Path origin The BGP origin attribute. Possible values will be igp , egp , incomplete ,
and none . The origin attribute is considered during the route decision
process.
Path local preference The local preference value for this route as received in an UPDATE
message. A negative value (for example, the
-1 in the above display)
indicates that the local preference value is missing for this route path.
Path state Indicates the state of the path.The possible states are best , feasible , pol-
icy-wait , un-synchronized , dampened , or none . When path state is
none , it indicates that there are no paths to this prefix and the route is
being purged from the system.
Path weight The path weight as assigned through inbound and outbound policies.
output definitions (continued)