Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 317 / 2354

Link Aggregation Commands show linkagg port
OmniSwitch CLI Reference Guide March 2011 page 6-59
-> show linkagg agg 1-5 port
Slot/Port Aggregate SNMP Id Status Agg Oper Link Prim
---------+-----------+--------+--------------+------+----+----+----+-----
1/16 Static 2016 CONFIGURED 1 UP UP YES
1/17 Static 2017 CONFIGURED 2 UP UP NO
3/1 Static 3001 CONFIGURED 3 UP UP NO
3/2 Static 3045 CONFIGURED 4 UP UP NO
3/3 Static 3069 CONFIGURED 5 UP UP NO
Output fields are defined here:
A port that belongs to a static aggregate is specified:
-> show linkagg port 4/1
Static Aggregable Port
SNMP Id : 4001,
Slot/Port : 4/1,
Administrative State : ENABLED,
Operational State : DOWN,
Port State : CONFIGURED,
Link State : DOWN,
Selected Agg Number : 2,
Port position in the aggregate: 0,
Primary port : NONE
Output fields are defined here:
output definitions
Slot/Port The slot/port associated with the aggregate group.
Aggregate The type of aggregate group associated with the port, either Static or
Dynamic .
SNMP Id The SNMP ID associated with the aggregate group.
Status The current status of the port, which can be
CONFIGURED , PENDING , SELECTED , or RESERVED .
Agg The number of the aggregate groups associated with this port.
Oper The operational status of the port.
Link The physical link status of the port.
Prim Specifies if the port is the primary port of the aggregate. The primary
port is the lowest numbered port in a link aggregate.
output definitions
SNMP Id The SNMP ID associated with this port.
Slot/Port The slot and port number.
Administrative State The current administrative state of this port, which can be ENABLED
or DISABLED .
Operational State The current operational state of the port, which can be UP or DOWN .
Port State The current operational state of the port, which can be
CONFIGURED , PENDING , SELECTED , or RESERVED .