Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 2110 / 2354

show mac-range Chassis MAC Server (CMS) Commands
page 39-4 OmniSwitch CLI Reference Guide March 2011
show mac-range
Displays the MAC range table.
show mac-range [index]
Syntax Definitions
index Identifies the MAC range by referring to its position in the MAC range
table.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Because the switch currently supports one MAC address range only, index position 1 displays.
Examples
-> show mac range
Mac Local/
Range Row Status Global Start Mac Addr End Mac Addr
-----+----------------+--------+------------------+------------------
01 ACTIVE GLOBAL 00:d0:95:6a:79:6e 00:d0:95:6a:79:8d
Release History
Release 7.1.1; command introduced.
output definitions
Mac Range The MAC range index number (1). Because the switch currently sup-
ports one MAC address range only, index position 1 displays.
Row Status The current status of the MAC range. The status ACTIVE refers to
MAC addresses that are available for allocation to VLAN router ports
and other applications.
Local/Global The Local/Global status for MAC addresses in the range. Local MAC
addresses have the local bit set in the first byte of the address. Global
MAC addresses (also referred to as
EEPROM MAC addresses) have
the global bit set in the first byte of the address and are stored on the
switch’s EEPROM. Because the switch’s default MAC range is stored
on EEPROM, the status GLOBAL displays.
Start Mac Addr The first MAC address in the MAC address range.
End Mac Addr The last MAC address in the MAC address range.