Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 597 / 2354

IPv6 Commands show ipv6 neighbors
OmniSwitch CLI Reference Guide March 2011 page 11-37
show ipv6 neighbors
Displays IPv6 Neighbor Table.
show ipv6 neighbors [ipv6_prefix/prefix_length | if_name | hw hardware_address | static]
Syntax Definitions
ipv6_prefix/prefix_length IPv6 prefix. Restricts the display to those neighbors starting with the
specified prefix.
if_name Interface name. Restricts the display to those neighbors reached through
the specified interface.
hardware_address MAC address. Restricts the display to the specified MAC address.
static Restricts display to statically configured neighbors.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
If you do not specify an option (e.g., if_name), all IPv6 neighbors are displayed.
Examples
-> show ipv6 neighbors
Total 2 neighbors
IPv6 Address Hardware Address Reachability Lifetime Port Interface
------------------+-----------------+------------+-----------+-------+-------------
2001:db8:39::11 0a:3f:1e:ac:7b:38 Unconfirmed 39s 1/ 1 vlan-41
fe80::83f:1eff:feac:7b38 0a:3f:1e:ac:7b:38 Confirmed 8m 21s 1/ 1 vlan-41
output definitions
IPv6 Address The neighbor’s IPv6 address.
Hardware Address The MAC address corresponding to the IPv6 address.
Reachability The neighbor’s reachability:
• Incomplete
• Confirmed
• Unconfirmed
Lifetime Tthe time the entry will remain in its current state.
Port The port used to reach the neighbor.
Interface The neighbor’s interface name (e.g., vlan_1)