Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 311 / 2354

Link Aggregation Commands show linkagg
OmniSwitch CLI Reference Guide March 2011 page 6-53
show linkagg
Displays information about static and dynamic (LACP) aggregate groups.
show linkagg {agg [agg_num1 [-agg_num2]}
Syntax Definitions
agg_num1 Specifies the aggregate group. Configured through the linkagg static
agg size or linkagg lacp agg size command.
-agg_num2 The last link aggregate ID in a range of link aggregate IDs.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
If no aggregation number is specified, information for all aggregate groups is displayed. If an
aggregate number is specified, only the information about the relevant aggregate group is displayed.
The fields included in the display depend on whether the aggregate group is a static or dynamic.
•
Use the show linkagg port command to display information about aggregate group ports.
Examples
No aggregate group is specified:
-> show linkagg
Number Aggregate SNMP Id Size Admin State Oper State Att/Sel Ports
-------+----------+--------+----+-------------+-------------+--------+-----
1 Static 40000001 8 ENABLED UP 2 2
2 Dynamic 40000002 4 ENABLED DOWN 0 0
3 Dynamic 40000003 8 ENABLED DOWN 0 2
4 Dynamic 40000004 8 ENABLED UP 3 3
5 Static 40000005 2 DISABLED DOWN 0 0
Output fields are defined here:
output definitions
Number The aggregate group number.
Aggregate The type of aggregate group, which can be Static or Dynamic .
SNMP Id The SNMP ID associated with the aggregate group.
Size The number of links in this aggregate group.