Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1108 / 2354

ip bgp policy route-map med-mode BGP Commands
page 19-140 OmniSwitch CLI Reference Guide March 2011
ip bgp policy route-map med-mode
Configures the action to be taken when setting the Multi-Exit Discriminator (MED) attribute for a match-
ing route.
ip bgp policy route-map name sequence_number med-mode {none | inc | dec | rep}
Syntax Definitions
name The route map name.
sequence_number The route map sequence number. The valid range is 1–255.
none Do not set the MED.
inc Increment the MED in the matching route by the value specified in the
ip bgp policy route-map med command. No action is taken if no MED
is found in the matching route.
dec Decrement the MED in the matching route by the value specified in the
ip bgp policy route-map med command. No action is taken if no MED
is found in the matching route.
rep Replace the MED in the matching route by the value specified in the ip
bgp policy route-map med command even if no MED is found in the
matching route.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This command is used in conjunction with ip bgp policy route-map med . The first example below shows
the combined usage. In the second example, the MED value is incremented for a matching route by 5.
Examples
-> ip bgp policy route-map routemap1 1 med-mode inc
-> ip bgp policy route-map routemap1 1 med 5 med-mode inc
Release History
Release 7.1.1; command was introduced.
parameter default
none | inc | dec | rep none