Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1185 / 2354

BGP Commands ipv6 bgp neighbor remote-as
OmniSwitch CLI Reference Guide March 2011 page 19-217
ipv6 bgp neighbor remote-as
Assigns an AS number to the BGP peer.
ipv6 bgp neighbor ipv6_address [remote-as num]
Syntax Definitions
ipv6_address The 128-bit IPv6 address of the BGP peer.
num Autonomous system number in the range 1–65535.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
A BGP peer created with the ipv6 bgp neighbor command cannot be enabled until it is assigned an
autonomous system number. If the AS number assigned to the peer matches the AS number of the local
BGP speaker (assigned using the
ip bgp autonomous-system command), the peer is considered inter-
nal to the local autonomous system. Otherwise, the peer is considered external to the local BGP
speaker’s AS.
•
The BGP peer is restarted after issuing this command.
Examples
-> ipv6 bgp neighbor 2001::1 remote-as 100
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaBgpPeer6Table
alaBgpPeer6Addr
alaBgpPeer6AS
parameter default
num 1
ip bgp autonomous-system Sets the AS for the local BGP speaker.