Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 152 / 2354

spantree mst region revision-level Distributed Spanning Tree Commands
page 5-10 OmniSwitch CLI Reference Guide March 2011
spantree mst region revision-level
Defines the revision level for a Multiple Spanning Tree (MST) region. One of three attributes (name,
revision level, and a VLAN to MST instance association table) that defines an MST region as required by
the IEEE 802.1Q 2005 standard. Switches that share the same attribute values are all considered part of the
same MST region. Currently each switch can belong to one MST region at a time.
spantree mst region revision-level rev_level
Syntax Definitions
rev_level A numeric value that identifies the MST region revision level for the
switch.
Defaults
By default, the MST revision level is set to zero.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
An MST region revision level can be assigned to the MST region regardless of which Spanning Tree
operating mode or protocol is currently active on the switch. However, MST configuration values, such as
revision level, only apply when the switch is operating in the flat Spanning Tree mode, using the MSTP.
Examples
-> spantree mst region revision-level 1000
-> spantree mst region revision-level 2000
Release History
Release 7.1.1; command introduced.
Related Commands
MIB Objects
vStpMstRegionTable
vStpMstRegionNumber
vStpMstRegionConfigRevisionLevel
spantree mst region name Defines the name for an MST region.
spantree mst region max-hops Defines the maximum number of hops for the MST region.
spantree msti Defines a MSTI number that identifies an association between a range
of VLANs and a Spanning Tree instance.
spantree msti vlan Defines an association between a range of VLANs and a single MSTI.