Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1178 / 2354

show ipv6 bgp network BGP Commands
page 19-210 OmniSwitch CLI Reference Guide March 2011
show ipv6 bgp network
Displays the status of all the IPv6 BGP networks or a specific IPv6 BGP network.
show ipv6 bgp network [ipv6_address/prefix_length]
Syntax Definitions
ipv6_address The 128-bit IPv6 address.
/prefix_length The number of bits that are significant in the IPv6 address (mask)
(3..128).
Defaults
By default, all IPv6 BGP networks and their status will be displayed.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the ipv6_address/prefix_length parameter to display the status of a specific IPv6 BGP nework.
Examples
show ipv6 bgp network
Network Admin state Oper state
------------------------------------+-----------+----------
2525:500:600::/64 enabled active
show ipv6 bgp network 2525:500:600::/64
Network address = 2525:500:600::/64,
Network admin state = enabled,
Network oper state = active,
Network metric = 0,
Network local preference = 0,
Network community string = <none>
output definitions
Network or Network address The IPv6 address configured for this local BGP network. This value is
configured through the
ipv6 bgp network command.
Admin state or Network admin
state
Indicates whether this local BGP network is administratively enabled
or disabled. This value is configured through the
ipv6 bgp network admin-state command.
Oper state or Network oper
state
Indicates whether this BGP local network is operationally active or
inactive.