Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1826 / 2354

show policy server rules Policy Server Commands
page 27-12 OmniSwitch CLI Reference Guide March 2011
show policy server rules
Displays the names of policies originating from a directory server, that have been downloaded to the
switch.
show policy server rules
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This command displays information about policies created on directory servers only. Chapter 25, “QoS
Commands,” for information about configuring and displaying policies directly on the switch.
Examples
-> show policy server rules
Num name prio scope status
---+-------------------+-------+-------------+------------
1 QoSRule1 0 Provisioned Active
2 QoSrule2 0 Provisioned Active
Fields are defined here:
output definitions
Num An index number corresponding to the policy rule.
name The name of the policy rule; only rules configured through PolicyView
are displayed in this table.
prio The priority or preference of the rule. Indicates the order in which rules
can be checked to match to the incoming traffic. If two or more rules
apply to the traffic, the rule with the highest preference is applied.
Preference is determined when the rule is created.
scope The type of rule. Provisioned is the only type valid for the current
release.
status The status of the rule: Active indicates that the rule has been pushed to
is available in the QoS software on the switch and is available to be
applied to the traffic;
notInService means the rule can be pushed to the
QoS software in the future but is not available yet (typically because of
a variable validity period);
notReady indicates that the rule can never
be pushed to the QoS software because its validity period has expired
or because it has been disabled through SNMP.