Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1976 / 2354

ethernet-service svlan nni VLAN Stacking Commands
page 34-8 OmniSwitch CLI Reference Guide March 2011
ethernet-service svlan nni
Configures the switch port as a VLAN Stacking Network Network Interface (NNI) and associates the port
with a customer SVLAN or normal SVLAN. A network port connects to another provider bridge and
carries both customer and provider traffic.
ethernet-service svlan {svlan_id [-svlan_id2]} nni {port slot/port[-port2] | linkagg linkagg_id
[-linkagg_id2]}
no ethernet-service svlan {svlan_id [-svlan_id2]} nni {port slot/port[-port2] | linkagg linkagg_id
[-linkagg_id2]}
Syntax Definitions
svlan_id The VLAN ID number identifying the SVLAN .
[-svlan_id2] The last VLAN ID number in a range of SVLANs that you want to
specify (for example 10-12 specifies VLANs 10, 11, and 12).
slot/port The slot number for the module and the physical port number of a NNI
port on that module (for example, 3/1 specifies port 1 on slot 3).
-port2 The last port number in a range of ports that you want to configure on
the same slot of a NNI port (for example, 3/1-4 specifies ports 1, 2, 3,
and 4 on slot 3).
linkagg_id The link aggregate ID number of a linkagg associated to a NNI.
linkagg_id2 The last link aggregate ID number associated to a NNI in a range of
aggregates that you want to configure.
Defaults
NA
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to remove an association between an NNI port and an SVLAN. Note
that when the last SVLAN association is removed, the NNI port reverts to become a conventional
switch port.
•
Only fixed ports can be configured as NNI ports.
•
Only SVLAN IDs are accepted with this command. This SVLAN ID specified must already exist in the
switch configuration.
•
When this command is used, the default VLAN for the NNI port is changed to a VLAN reserved by the
switch for applications such as VLAN Stacking. The reserved VLAN cannot be configured using
standard VLAN management commands.