Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 882 / 2354

ip ospf restart-helper admin-state OSPF Commands
page 17-48 OmniSwitch CLI Reference Guide March 2011
ip ospf restart-helper admin-state
Administratively enables and disables the capability of an OSPF router to operate in helper mode in
response to a router performing a graceful restart.
ip ospf restart-helper [admin-state {enable | disable}]
Syntax Definitions
enable Enables the capability of an OSPF router to operate in helper mode.
disable Disables the capability of an OSPF router to operate in helper mode.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The minimum hardware configuration for this command is a redundant CMM configuration. This
command is not supported on OmniSwitch 10K switches with a single CMM.
Examples
-> ip ospf restart-helper admin-state disable
-> ip ospf restart-helper admin-state enable
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaProtocolOspf
alaOspfRestartHelperSupport
parameter default
enable | disable enable
ip ospf restart-support Administratively enables and disables support for the graceful
restart feature on an OSPF router.
ip ospf restart-helper strict-lsa-
checking admin-state Administratively enables and disables whether or not a changed
Link State Advertisement (LSA) will result in termination of grace-
ful restart by a helping router.
show ip ospf restart Displays the OSPF graceful restart related configuration and status.