Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 2347 / 2354

OmniSwitch CLI Reference Guide March 2011 page 19 Health Monitoring Commands
show log swlog
show log swlog [session
session_id ] [timestamp start_time [ end_time ]] [appid appid ] [level
level ]
show swlog
Health Monitoring Commands
health threshold {rx percent | txrx percent | memory percent | cpu percent }
health interval seconds
show health configuration
show health [port
slot/port | slot slot
[
-slot1
]]
[statistics]
show health all {memory | cpu | rx | txrx}
CMM Commands
reload secondary [in [ hours :] minutes | at hour : minute [ month day | day month ]]
reload secondary cancel
reload all [in [
hours :] minutes | at hour : minute [ month day | day month ]]
reload all cancel
reload from
image-dir {rollback-timeout minutes | no rollback-timeout} [in
[
hours:
]
minutes
| at hour:minute ] [redundancy-time minutes]
reload slot slot
copy certified image-dir [make-running-directory]
issu from image-dir
issu slot num
write memory [flash-synchro]
copy running certified [flash-synchro]
modify running-directory
image-dir
copy flash-synchro
takeover
show running-directory
show reload [status | all status]
show microcode [certified | loaded | issu | image-dir]
usb {enable | disable}
usb auto-copy {enable | disable}
mount [/uflash]
umount /uflash
show usb statistics
show issu status
Chassis Management and Monitoring Commands
system contact text_string
system name text_string
system location text_string
system date [ mm/dd/yyyy ]
system time [ hh:mm:ss ]
system timezone [ timezone_abbrev ]
system daylight-savings-time
reload slot
slot
power slot slot
no power slot slot
temp-threshold temp
powersupply enable [ slot ]
show system
show hardware info
show chassis
show cmm [
slot ]
show slot [ slot ]
show module [ slot ]
show module long [ slot ]
show module status [ slot ]
show powersupply [ slot ]
show fan [ slot ]
show fantray [ slot ]
show temperature [fabric [ index ] | slot [ index ] | fantray [ index ] | cmm [ index | cmm_letter ]]
Chassis MAC Server (CMS) Commands
mac-range eeprom start_mac_address count
show mac-range [ index ]
show mac-range [ index ] alloc
Network Time Protocol Commands
no ntp server { ip_address }
ntp server synchronized
ntp server unsynchronized
ntp client admin-state {enable | disable}
ntp src-ip preferred {default | no-loopback0 |
ip_address }
no ntp src-ip preferred
ntp broadcast-client {enable | disable}
ntp broadcast-delay
microseconds
ntp key key [trusted | untrusted]
ntp key load
ntp authenticate {enable | disable}
ntp master {stratum-number}
ntp interface {interface-ip} {enable | disable}