Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1890 / 2354

port-mapping user-port network-port Port Mapping Commands
page 29-2 OmniSwitch CLI Reference Guide March 2011
port-mapping user-port network-port
Creates a port mapping session with the user ports, network ports, or both user ports and network ports.
Use the
no form of the command to delete ports or a link aggregate group from a session.
port-mapping port_mapping_sessionid [user-port {slot slot | slot/port[-port2] | linkagg linkagg_id}]
[network-port {slot slot | slot / port[-port2] | linkagg linkagg_id}]
no port-mapping port_mapping_sessionid [user-port {slot slot | slot/port[-port2] | linkagg linkagg_id}]
[network-port {slot slot | slot / port[-port2] | linkagg linkagg_id}]
Syntax Definitions
port_mapping_sessionid The port mapping session ID.
user-port Specifies a user port of the mapping session.
network-port Specifies a network port of the mapping session.
slot Specifies that a slot is assigned to the mapping session.
slot Enter the slot number to be assigned to the mapping session.
port Enter the port number to be assigned to the mapping session.
port2 Last port number in a range of ports assigned to the mapping session.
linkagg Specifies that a link aggregation group is assigned to the mapping
session.
linkagg_id Enter a link aggregate ID number.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
User ports that are part of one session cannot communicate with each other. The user ports can
communicate only through network ports of the session to the other elements of the system.
•
User ports can be part of only one port mapping session.
•
An aggregable port of a link aggregation group cannot be a mapped port and a mapped port cannot be
an aggregable port of a link aggregation group.
•
A mirrored port cannot be a mapped port and a mapped port cannot be a mirrored port.