Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 798 / 2354

vrrp set VRRP Commands
page 16-20 OmniSwitch CLI Reference Guide March 2011
vrrp set
Sets the new default parameter values to existing virtual routers on the switch.
vrrp set [interval | priority | preempt | all | none] [ override]
Syntax Definitions
interval Sets the VRRP advertisement interval value to the new default value.
priority Sets the priority value to the new default value.
preempt Sets the preempt mode to the new default mode.
all Sets all the parameters value to the new default value.
none Resets all the parameter values to their default values.
override Overrides the specified parameters configured value with the new
default value.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
All the virtual routers must be disabled before using this command.
•
To apply the new default value to the existing virtual routers, you must first disable the virtual routers,
then apply the new default value using the
vrrp set command and enable the virtual routers again.
•
If any of the virtual routers are running with their own configured value or group value, then that value
will take priority over the new default value. To override the configured value with the new default
value, you must first disable the virtual routers, then override the configured value using the
vrrp set
command with the override option and enable the virtual routers again.
Examples
-> vrrp set priority
-> vrrp set priority override
Release History
Release 7.1.1; command was introduced.
parameter default
interval | priority | preempt | all all