manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, User Manual

Share
Download
YOKOGAWA ScopeCorder DL750 User Manual Download Page 36

10-20

IM 701210-06E

Operator

Setting Example

Description

PSD-

PSD-MAG(C1)

Displays the amplitude of the specified waveform’s power
spectrum density.

PSD-LOGMAG(C1)

Displays the logarithmic amplitude of the specified
waveform’s power spectrum density.

CS-

CS-MAG(C1,C2)

Displays the amplitude of the two specified waveforms’
cross spectrum.

CS-LOGMAG(C1,C2)

Displays the logarithmic amplitude of the two specified
waveforms’ cross spectrum.

CS-PHASE(C1,C2)

Displays the phase of the two specified waveforms’ cross
spectrum.

CS-REAL(C1,C2)

Displays the real part of the two specified waveforms’ cross
spectrum.

CS-IMAG(C1,C2)

Displays the imaginary part of the two specified waveforms’
cross spectrum.

TF-

TF-MAG(C1,C2)

Displays the amplitude of the two specified waveforms’
transfer function.

TF-LOGMAG(C1,C2)

Displays the logarithmic amplitude of the two specified
waveforms’ transfer function.

TF-PHASE(C1,C2)

Displays the phase of the two specified waveforms’ transfer
function.

TF-REAL(C1,C2)

Displays the real part of the two specified waveforms’
transfer function.

TF-IMAG(C1,C2)

Displays the imaginary part of the two specified waveforms’
transfer function.

CH-

CH-MAG(C1,C2)

Displays the amplitude of the two specified waveforms’
coherence function

Waveforms and Variables to Be Computed

CH waveforms (C1 to C16), DSP channel waveform (DSP1 to DSP, optional), Math

waveform (M1 to M7), variable T (the total number of data points in the time direction is

defined to be T.  It is displayed as a rising line on the screen.)

Combinations of Computing Equations That Are Not Allowed

• An equation of a large number cannot be placed in an equation of a smaller number.

Example: Math5 = M6+M3

• Computation containing only constants (K1 to K8) are not allowed.

Example: Math5 = M1+K8

• Only two operators can be used in an equation for FILT1 and FILT2.

Example: FILT1(C1)+FILT1(C2)+FILT1(C3)

• Only one operator can be used in a FFT equation.

Example: PS–MAG(C1+C2)

• Other computations cannot be performed on the result of the FFT.

Example: PS–MAG(C1)+C2

• Other computations cannot be performed on the pulse width computation.

Example: PWHH(C1)+C2

• Only one operator can be used in an equation when making a Shift width

computation, pulse width computation, or binary computation.

Example: SHIFT(C1+C2), BIN(C1–C2), PWHH(C1*C1)

• The following computations cannot be performed on DSP channels.

BIN, PWHH, PWHL, PWLH, PWLL, and PWXX

If you wish to perform an FFT, SHIFT, pulse width computation, or binary computation on

the computed result such as C1+C2, enter the equations as in M1=C1+C2, M2=PS–

MAG(M1).

10.5 User-Defined Computation (Optional)

Summary of Contents for ScopeCorder DL750























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands