manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, User Manual

Share
Download
YOKOGAWA ScopeCorder DL750 User Manual Download Page 232

16-21

IM 701210-06E

Ethernet Interface (Optional)

16

16.6 Accessing the DL750/DL750P from a PC or Workstation (FTP Server Function)

Executing the FTP Client Software

9.

Execute an FTP client software on the PC or workstation.  Perform file

operations using the user name specified in steps 4 and 5.

Displaying the Connection Log List

10.

Press the 

Connect Log List

 soft key.  The data and time, user name, and IP

address of the 25 recent accesses are displayed.

Note

•

The log list is cleared when the power is turned OFF.

•

The DL750/DL750P supports two clients, but file operations cannot be performed
simultaneously.

•

When the DL750/DL750P is being accessed from a PC or workstation (logged in), 

 is

displayed in the lower right part of the screen.

•

This function cannot be used when using the FTP client function, network printer function,
or the Web server function, or when performing file operations.

•

To use this function, configure the TCP/IP settings beforehand according to section 16.2,
“Setting the TCP/IP.”

•

To apply new settings, the DL750/DL750P must be power cycled.

•

The files that can be uploaded to the DL750/DL750P are those with the following
extensions.
.WVF, .HDR, and .SET
However, do not upload files to the realtime recording area.

Summary of Contents for ScopeCorder DL750























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands