10-17
IM 701210-06E
Waveform Computation
10
Setting the Number of Points for FFT and the Time Window
If you specified FFT in the equation, set the following items.
27.
Set FFT Points and FFT Window according to steps 19 to 22 in section 10.3.
Setting the Constants (K1 to K8)
28.
Press the
Next 1/2
soft key.
29.
Press the
Constant
soft key. The constant setup menu appears.
30.
Use the
jog shuttle
and
SELECT
to set the constants K1 to K8.
Setting Average and Peak Computation
31.
Press the
Average
soft key. The average setup dialog box appears.
32.
Use the
jog shuttle
and
SELECT
to select Average Mode from OFF, Linear,
Exp, Cycle, and Peak. If you select Peak, the operation ends here.
• When Linear or Exp Is Selected
33.
Use the
jog shuttle
and
SELECT
to set Average Domain to Time or Freq.
34.
Use the
jog shuttle
and
SELECT
to set Linear Count (average count) or
Average Weight (attenuation).
• When Cycle Is Selected
35.
Use the
jog shuttle
and
SELECT
to set Cycle Count (the number of data points
per cycle).
10.5 User-Defined Computation (Optional)
