manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, User Manual

Share
Download
YOKOGAWA ScopeCorder DL750 User Manual Download Page 246

16-35

IM 701210-06E

Ethernet Interface (Optional)

16

16.7 Using the Web Server Function

Loading the Setup Data from the PC into the DL750/DL750P (Load)

Input Password

Enter the password (see page 16-27) that you used to log into the Web server

(DL750/DL750P).  If the user name of the user account is set to “anonymous”

(default setting), the password is not required.

Setup Load

Click Setup Load to display the Open dialog box.  Select the setup data file you

wish to load and click OK to execute the load operation.

Note

•

Depending on the operation condition of the DL750/DL750P (such as when measurement
is in progress), data save and setup data load operations may not be possible.

•

When data is being saved or the setup data is being loaded, other Web server functions
cannot be used.

•

When loading the setup data or when aborting the save operation, a temporary file
(zzzftpzzztmpzzz.bat) is created in the start directory of the Internet Explorer.  After the
operation is complete, the temporary file will be deleted.

•

If you execute the data save operation when there is no waveform data or waveform
parameter, an error is displayed on the DL750/DL750P screen, and a 0-byte file is saved.

• Controlling the DL750/DL750P (Instrument Control)

You can use the PC to set the display format and the data save conditions of the

DL750/DL750P.  The settings entered here apply to the display format and save

conditions used to save the data on the previous page

Starting/Stopping the Waveform Acquisition (Acquisition)

Start

Click 

Start 

to start the waveform acquisition.

Stop

Click 

Stop 

to stop the waveform acquisition.

Turning ON/OFF the Waveform Display and Setting the Vertical Position

(Channel)

Selecting the Target Waveform

From the channel box, select the channel for turning ON/OFF the display and

setting the vertical position from the following:

Chan1 to Chan16 (channels 1 to 16), DSP1 to DSP6 (optional)

Display ON/OFF

To display the waveform of the selected channel (turn it ON), select the Display

check box.  Clear the check box to not display the waveform of the selected

channel (OFF).

Vertical Position

You can set the vertical position of the waveform of the selected channel.  For a

description of the selectable range of the vertical position, see section 5.4.

Summary of Contents for ScopeCorder DL750























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands