manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, User Manual

Share
Download
YOKOGAWA ScopeCorder DL750 User Manual Download Page 233

16-22

IM 701210-06E

Explanation

You can access the DL750/DL750P’s floppy disk drive, Zip drive, PC card drive, internal

hard disk (optional), SCSI device, or USB storage device from a PC or workstation via

the Ethernet network.

To access the DL750/DL750P, an FTP client software is needed on the PC or

workstation.

For a description of the FTP using the Web browser (Web server function), see section

16.7.

User Name

Enter the user name using up to 15 characters.  The default setting is “anonymous.”  The

characters that can be used are all the ASCII characters on the keyboard.

Password

Enter the password using up to 15 characters.  The characters that can be used are all

the ASCII characters on the keyboard.

Time Out

The connection to the network is automatically closed if there is no access to the DL750/

DL750P for the specified time.

Note

•

It is recommended that the timeout be set to 600 s when using the FTP server function
through a dedicated FTP client.

•

When using the FTP server function on a Web browser (see section 16.7), it is
recommended that the timeout be set to 5 s (default value).

Connect Log List

The data and time, user name, IP address, access result of the 25 recent accesses from

the PC or workstation to the DL750/DL750P are displayed.

16.6 Accessing the DL750/DL750P from a PC or Workstation (FTP Server Function)

Summary of Contents for ScopeCorder DL750























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands