manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, User Manual

Share
Download
YOKOGAWA ScopeCorder DL750 User Manual Download Page 175

13-62

IM 701210-06E

Explanation

Selecting the Copy Source Files

You can copy all files that have an asterisk to the left of the file name.  There are two

methods in selecting the files to be copied.

• Selecting the Files One at a Time: Set/Reset

Place an asterisk to the left of the file names one at a time, using the Set/Reset soft

key.

• Selecting All the Files at Once: All Set

Places an asterisk to the left of all the file names selected collectively using the All Set

soft key.

If you select a file and press the All Set soft key, asterisk marks are placed on all the

files in the directory containing the selected file.

Specifying the File to Be Displayed on the File List Window: Filter

Specify the type of files to be displayed.

• *.Extension

Displays only the data file that was selected in the File Item setup menu and the data

type menu.

• *.*

Displays all the files in the medium.

Property

Displays the following information about the selected file: filename.extension, the file

size, the date the file was saved, the attribute, the comment, etc.

Note

•

Files cannot be copied while the data acquisition is in progress.

•

If an error occurs while copying multiple files, the files after the error occurrence are not
copied.

•

You cannot change a directory attribute.

•

You cannot copy files if files with the same file name exist at the copy destination, .

•

You cannot copy the same files to another directory after copying the files.  Select the files
to be copied again and copy them.

•

The date/time information of the copied file retains the date/time information of the copy
source file. However, if the copy destination is a network drive, the date/time is set to the
date/time when the file is copied.

•

This function cannot be used when using the FTP server function, network printer function,
or the Web server function.

•

The screen image data and thumbnail data are saved in pairs of files.  If you specify “*.*”
for the files to be displayed (Filter) on the File List and manipulate individual files (Delete,
Rename, or Copy), the thumbnail display function can no longer be used.

•

Copying to the [RealTime] drive is not possible.  (Copying from the [RealTime] drive to
other drives is possible.)

13.16  Copying Files

Summary of Contents for ScopeCorder DL750























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands