manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, User Manual

Share
Download
YOKOGAWA ScopeCorder DL750 User Manual Download Page 179

13-66

IM 701210-06E

Property

Displays the following information about the selected file: filename.extension, the file

size, the date the file was saved, the attribute, the comment, etc.

Note

•

You cannot rename a directory/file or create a new directory while the data acquisition is in
progress (START/STOP indicator is ON).

•

You cannot change a directory attribute.

•

If a file with the same name already exists in the same directory, the file cannot be
renamed.

•

If a directory with the same name already exists in the same directory, the directory cannot
be created.

•

This function cannot be used when using the FTP server function, network printer function,
or the Web server function.

•

The screen image data and thumbnail data are saved in pairs of files.  If you specify “*.*”
for the files to be displayed (Filter) on the File List and manipulate individual files (Delete,
Rename, or Copy), the thumbnail display function can no longer be used.

•

Directories cannot be created on the [RealTime] drive.

13.17  Changing the Directory/File Name of the Storage Medium and Creating Directories

Summary of Contents for ScopeCorder DL750























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands