YOKOGAWA ScopeCorder DL750 User Manual Download Page 234

Page: 234 / 406

16-23

IM 701210-06E

Ethernet Interface (Optional)

16.7 Using the Web Server Function

<For a description of this function, refer to page 2-60.>

You can use the Web server function on the DL750/DL750P to display the screen image

of the DL750/DL750P on the Web browser window on your PC and perform file

operations on the DL750/DL750P using the keys displayed on the Web browser window.

This section contains the following information.

• Overview of the Web Server Function -> See this page.

• Operating Environment

• PC Environment -> See page 16-24.

• DL750/DL750P Environment -> See page 16-25.

• Preparations for Using the Web Server Function

• Preparations on the DL750/DL750P -> See page 16-26.

• Preparations on the PC -> See page 16-27.

• Using the Web Server Function

• Using the FTP Server Function -> See 16-31.

• Performing Data Capture -> See page 16-32.

• Displaying the Measurement Trend of Waveform Parameters

-> See page 16-38.

• Using Control Scripts -> See page 16-42.

• Showing the Log -> See page 16-44.

• Showing the Instrument Information -> See page 16-46.

• Viewing the Link Destination -> See page 16-47.

Overview of the Web Server Function

• FTP Server Function (On the Web Browser)

View the list of files stored on the storage media of the DL750/DL750P (internal hard

disk or built-in storage medium) and transfer files to the PC.

• Data Capture

The following operations can be carried out.

• Change the display format of the DL750/DL750P and display data that is acquired

in the history memory.

• Display the screen image of the DL750/DL750P.

• Save the waveform data and setup data to the PC.

• Load the setup data stored on the PC into the DL750/DL750P.

• Measurement Trend of the Waveform Parameter Values

Using the Excel function, display the trend of the selected waveform parameter

values. The statistics of the measured values can also be computed.

• Control Script

Control the DL750/DL750P using communication commands (see the

Communication

Interface User’s Manual

IM701210-18E.

• Log

Displays the past log of errors that occurred on the DL750/DL750P, GO/NO-GO

determination, and action-on-trigger. Up to the 30 newest incidents are logged.

• Instrument Information

Display the model of the DL750/DL750P, the module configuration, the presence/

absence of options, the ROM version (firmware version), etc.

• Link

View the Web page for the DL750/DL750P.

Summary of Contents for ScopeCorder DL750























































































































































































































































































































































































































Search results

Summary of Contents for ScopeCorder DL750

Reviews:

Brands by name

Popular brands

YOKOGAWA ScopeCorder DL750, User Manual

Search results

Summary of Contents for ScopeCorder DL750

Reviews:

Brands by name

Popular brands