manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, User Manual

Share
Download
YOKOGAWA ScopeCorder DL750 User Manual Download Page 153

13-40

IM 701210-06E

Explanation

The screen image data can be stored to a specified storage medium.

You can select the storage medium from the floppy disk, Zip disk, PC card, external

SCSI device, internal hard disk (optional), and network drive (when the Ethernet

interface option is installed).  For details on saving data to the network drive, see section

16.3.

Setting the Output Format

Data in the following formats can be saved to a specified storage medium.  The

extension that is automatically attached and the file size (reference value) are indicated

below.

Output Data Format

Extension

File Size

1

PNG

*.PNG

Approx. 6 kbytes (Approx. 14 kbytes)

2

JPEG

*.JPG

Approx. 400k bytes (Approx. 400 kbytes)

2

BMP

*.BMP

Approx. 60 kbytes (Approx. 480 kbytes)

2

Post Script

*.PS

Approx. 123 kbytes

1. When color is OFF
2. The file size inside the parentheses is for the case when color is ON

Setting the Color (When Format Is BMP)

Select ON, ON(Revers), ON(Gray), or OFF.

ON:

Output using 256 colors.

ON(Revers): Do not output the background of the screen in color.

ON(GRAY):

Output the data using a tint of 16 gray levels.

OFF:

Output in black and white.

Setting the Compression Format (When Format Is BMP and Color Is Not OFF)

When the output format is set to BMP, the data can be output by compressing using

RLE.  However, data compression is not possible if the color is OFF.

Setting a Comment

A comment of up to 20 characters can be added to the lower section of the screen and

saved.  Comments are optional.  All characters (including spaces) can be used.

Setting the Save Destination: File List

The available storage medium is displayed in the File List window.

• Display Examples of Storage Media

[FD]:

Floppy disk

[ZIP]:

Zip disk

[PC Card]:

PC card

[HD]:

Hard disk

[SCSI5]:

SCSI device with the ID number set to 5

1

[SCSI5-1]:

Partition 1 of a SCSI device whose ID number is 5

1

[NetWork]:

Network drive (when the Ethernet interface option is installed)

[USB]:

USB storage device

1. When a SCSI device whose ID number is 5 is connected

Floppy Disk, Zip Disk, PC Card, Internal Hard Disk, External SCSI Device, and USB

Storage Device

Floppy disk, Zip disk, PC card, internal hard disk, and external SCSI device are

described in sections 13.1 to 13.4.  For the formatting procedure, see section 13.5.

13.11  Saving Screen Image Data

Summary of Contents for ScopeCorder DL750























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands