manualshive.com logo in svg

YOKOGAWA ScopeCorder DL750, User Manual

Share
Download
YOKOGAWA ScopeCorder DL750 User Manual Download Page 132

13-19

IM 701210-06E

Saving and Loading Data

13

Selecting Save Destination Medium

13.

Press the 

File List

 soft key.  The File List window appears.

14.

Turn the 

jog shuttle

 to select the save destination medium (indicated by

brackets).

15.

Press 

SELECT

 to confirm the storage medium.

Selecting the Destination Directory

(Perform this operation when directories are present on the medium.)

16.

Turn the 

jog shuttle

 to select the save destination directory (indicated by < >).

17.

Press 

SELECT

 to confirm the directory.  The selected medium/directory is

displayed in “Path=......” located above and to the left of the File List window.

Select <..> to move to the parent directory.

Note

If History is set to All, MATH channels are not saved.  If you wish to save the data of MATH
channels, set History to One.

13.7  Saving/Loading the Waveform Data

Summary of Contents for ScopeCorder DL750























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands