YOKOGAWA ScopeCorder DL750 User Manual Download Page 145

Page: 145 / 406

13-32

IM 701210-06E

Setting the File Name and Comment

10.

Press the

File Name

soft key. The file name setup menu appears.

11.

Turn the

jog shuttle

to select Auto Naming.

12.

Press

SELECT

to select OFF, Numbering, or Date.

13.

Turn the

jog shuttle

to select File Name.

14.

Enter the file name using up to 16 characters according to the procedure given

in section 4.2.

15.

Turn the

jog shuttle

to select Comment.

16.

Enter the comment using up to 160 characters according to the procedure given

in section 4.2.

Note

You can set up to 16 characters for the file name, but only 15 characters are displayed on the
setup menu.

Executing the Save Operation

17.

Press the

Save Exec

soft key. The data is saved to the directory indicated by

Path=...... At the same time, the

Save Exec

soft key changes to an

Abort

soft

key.

Aborting the Save Operation

18.

Press the

Abort

soft key. The save operation is aborted. At the same time, the

Abort

soft key changes to a

Save Exec

soft key.

While the data is being saved, an icon corresponding the save destination

medium (

FD,

Zip disk,

PC card,

external SCSI device,

internal

HD, or

USB storage device) is displayed at the upper left corner of the

screen.

Specifying the File to Be Displayed on the File List Window

19.

On the screen showing the File List window, press the

Filter

soft key to select

*.SNP or *.*.

20.

Turn the

jog shuttle

to select the files in the File List window.

Displaying Properties

21.

Press the

Property

soft key. Information about the selected file is displayed.

13.9 Saving/Loading Snapshot Waveforms

Summary of Contents for ScopeCorder DL750























































































































































































































































































































































































































Search results

Summary of Contents for ScopeCorder DL750

Reviews:

Brands by name

Popular brands

YOKOGAWA ScopeCorder DL750, User Manual

Search results

Summary of Contents for ScopeCorder DL750

Reviews:

Brands by name

Popular brands