Yamaha RCX141, User Manual

Page: 224 / 402

4-
166
Operation
4
12. “SYSTEM” mode
2. Data display length/DATLEN
This parameter sets the number of digits to display such as for point data. This is
automatically set to “6char” (6 digits) when the parameters are initialized.
[Procedure]
1) Select “2. Data display length” in “SYSTEM>PARAM>OTHERS” mode.
2) Press the
F 1
(EDIT) key.
The function key menu changes.
Fig. 4-12-32 Setting the “Data display length”
SYSTEM >PARAM>OTHERS V8.30
1.Display language(JPN/ENG)
ENGLISH
2.Data display length 6char
3.Parameter display unit PULSE
4.DO cond. on EMG HOLD
5.Watch on STD.DIO DC24V
VALID
6char 8char
3) Press the
F 1
(6char) or
F 2
(8char) key.
4) Press the
ESC
key to quit the edit mode.
3. Parameter display unit/PDUNIT
This parameter sets the units for showing axis parameters. This is automatically set to
“pulses” when the parameters are initialized.
[Procedure]
1) Select “3. Parameter display units” in “SYSTEM>PARAM>OTHERS” mode.
2) Press the
F 1
(EDIT) key.
The function key menu changes.
Fig. 4-12-33 Setting the parameter display units
SYSTEM >PARAM>OTHERS V8.30
1.Display language(JPN/ENG) ENGLISH
2.Data display length 6char
3.Parameter display unit PULSE
4.DO cond. on EMG HOLD
5.Watch on STD.DIO DC24V
VALID
PULSE MM/DEG
3) Press the
F 1
(PULSE) or
F 2
(MM/DEG) key.
4) Press the
ESC
key to quit the edit mode.