Yamaha RCX141, User Manual

Page: 115 / 402

4-
57
4
Operation
10. “PROGRAM” mode
10.3 Directory
When the
F 3
(DIR) key is pressed in “PROGRAM” mode, information on each
program appears as shown below.
Fig. 4-10-17 Program information (1)
PROGRAM >DIR <TEST1 >
No. Name Line Byte RW/RO
1 TEST1 55 952 RW
2 * TEST2 50 907 RW
3 PARTS100 38 843 RW
4 TEST100 100 1968 RW
NEW INFO
Pressing the
→
key on the above screen displays the “DATE” and “TIME”
data.
(Press the
→
key to return to the previous display.)
Fig. 4-10-18 Program data (2)
PROGRAM >DIR <TEST1 >
No. Name Date Time
1 TEST1 04/06/25 10:18
2 * TEST2 04/06/26 17:20
3 PARTS100 04/05/03 13:19
4 TEST100 04/05/01 08:35
NEW INFO
Contents of each item are shown below.
No.
Name
Line
Byte
RW/RO
Date
Time
Indicates the serial number of the program. The number of the program which is
currently selected is highlighted (reversed background).
Indicates the program name.
The “ * ” mark (reversed background) shows this program is compiled and the object
program exists.
The “ s ” mark (reverse background) shows an object exists in the sequence program.
Shows the number of lines in the program.
Shows how many bytes of memory the program uses.
Indicates the program attribute.
RW : Reading or writing enabled.
RO : Reading only enabled; writing inhibited.
Shows the date when the program was made or edited.
Shows the time when the program was made or edited.
Item Description
n
NOTE
A maximum of 100 programs can be
stored.
n
NOTE
The date and time are updated when
the program is created or edited.