4-
81
4
Operation
11. “MANUAL” mode
4) When point data is already allotted to the currently selected point number, a
confirmation message appears on the guideline when the
F 2
(TEACH) key is
pressed.
Fig. 4-11-12 Point data teaching (with no auxiliary axis [3])
MANUAL
>POINT>TEACH 50%[MG][S0H0X]
————————————x———————y———————z———————r———
P7 = 100.00 250.00 15.00 30.00
P8 = 50.00 100.00 5.00 10.00
P9 =
122.62 -24.54 12.35 -23.11
[POS] 50.00 100.00 5.00 10.00
Overwrite point OK?
YES
NO
COMNT: [ ]
Press the
F 4
(YES) key to perform the teaching. The specified point number
data is rewritten.
Press the
F 5
(NO) key if you want to cancel the teaching input.
When an auxiliary axis is used:
[Procedure]
1) In “MANUAL> POINT” mode, use the cursor keys to select the point number to
obtain point data.
Fig. 4-11-13 Point data teaching (with auxiliary axis [1])
When teaching at P8
MANUAL
>POINT 100%[MG][S0H0X]
————————————x———————y———————z———————r———
P7 = 100.00 250.00 15.00 30.00
P8 =
220.00 150.00 115.00 90.00
P9 = 400.00 200.00 15.00 -30.00
[POS] -100.00 400.00 50.15 111.23
EDIT TEACH JUMP VEL+ VEL-
COMNT: [ ]
Summary of Contents for RCX141
