Yamaha RCX141, User Manual

Page: 259 / 402

4-
201
4
Operation
12. “SYSTEM” mode
2. Direct connection from DI n ( ) to SO n ( )
Parallel port input can be directly connected to serial port output. The relation be-
tween serial and parallel ports that can be set is as follows.
DI port
→
SO port
DI2()
DI3()
DI4()
DI5()
SO2()
SO3()
SO4()
SO5()
Input devices such as sensors
[Procedure]
1) Select from 5 to 8 in "SYSTEM>OPTION>SIO" mode.
2) Press the
F 1
(EDIT) key.
Fig. 4-12-82 Editing the SIO settings (2)
SYSTEM >OPTION>SIO V8.30
4.Direct SI5()->DO5() NO
5.Direct SO2()<-DI2() NO
6.Direct SO3()<-DI3() NO
7.Direct SO4()<-DI4() NO
8.Direct SO5()<-DI5() NO
SET NO
3) Press the
F 1
(SET) key to set the direct connection or press the
F 2
(NO)
key not to set it.
4) Press the
ESC
key to quit the setting. To continue selecting other items, use the
cursor (
↑
/
↓
) keys.
n
NOTE
Output results might be incorrect if the
SIO specified port is the same as the
port used by the program.