Xante Colour ScreenWriter, User Manual

Page: 298 / 446

9-32 Maintenance and Specifications bb ________________________
5. Align the OPC belt cartridge with the OPC guides (fig. 9.34)
and lower the cartridge back into the printer until it seats in
place.
6. Rotate the OPC guides down and back into their original
positions (fig. 9.34).
7. Close the front and top covers. If you are not cleaning other
areas, reconnect any interface cables and the power cord, and
turn on the printer.
Optical Unit Lens Cleaning
Only clean the optical unit lens if your output has vertical lines or
light primary color streaks.
Required tools: • Several clean, dry, lint-free cotton cloths
1. Turn off the printer and disconnect the power cord from the
power source.
2. Open the printer’s front and top covers and remove all
installed toner cartridges (fig. 9.36).
OPC Guides
Top Cover
Front Cover
OPC Guide
Gear
Fig. 9.36 Remove Installed Toner Cartridges
3. Pivot the OPC guides straight up toward the front of the printer
(fig. 9.36).