Xante Colour ScreenWriter, User Manual

Page: 88 / 446

3-28 Macintosh Setup bb ____________________________________
Other Special Menu Options
We recommend that you use XANTÉ Command Center’s General:
Reboot Printer option instead of Clear Font Cache or Restart Printer
options in the Special menu. See the PostScript Reference Language
Manual about the Use Different Password option.
Procedures
This section provides instructions for performing special procedures
using XANTÉ Command Center and Adobe Downloader.
Color Linearization (Calibration)
Using a densitometer capable of reading dot area and XANTÉ
Command Center, you can color calibrate (linearize) your printer’s
performance to eliminate color inconsistencies due to resolution and
lpi (lines per inch) settings; to replacement of OPC belt and toner
cartridges; to different media types; and to environmental conditions.
To linearize your printer’s colors
1. Print a color calibration page either from the printer’s front
panel or from XANTÉ Command Center using one of the
following procedures:
Note: Always print the calibration page using the same
media and toner as used for final copy.